Roof and Paving

A versatile emulsion based UV resistant roof and paving paint with excellent
adhesion.

Download Material and Technical Data Safety Sheets

Please enter your email to download Material Safety Data Sheet and Technical Safety Data Sheet for this product.
Product benefits:
  • Quick drying
  • Application by brush or roller
  • Provides a long lasting toughness against all weather conditions
  • UV Resistant
Intended use
  1. For direct application to new unprimed galvanised steel, asbestos and cement tiles.
  2.  Can also be used on galvanised garage doors, galvanised gutters, cement and sheet metal,
    cladding, garden pots, window sills and fascia boards
Product Information
Type : Pure Acrylic
Viscosity : 98– 105 Kµ
Specific Gravity : 1.23 – 1.27
Mass Solids : 38 – 42%
Spreading Rate : 10– 12m²/L dependent on surface texture and porosity.
Gloss Level : Matt
Colour : Terracotta, White, Red, Blue, Black and Green
Application Details
Mixing : Stir well before use with a flat paddle to an even consistency. Stir occasionally during use.
Method : Roller brush or airless spray gun.
Thinning : Mineral Turpentine if required to maximum 10%.
Cleaning : Mineral Turpentine
Conditions : Temperature between 5°C and 40°C, relative humidity of less than 85%, preferably
between 10:00 and 16:00. Ideally, apply when the temperature of the substrate is at least
2⁰C above dew point, if possible away from direct sunlight.
Drying time : Touch dry 4hrs at 23°C. Note: higher temperatures will accelerate the drying times
(approximately halved for every 10⁰C increase), whilst lower temperatures will retard the
drying times (approximately doubled for every 10⁰C decrease.
Recoating time : 18 Hours at 23°C.
Requirements : Two Coats
Surface Preparation
Surface must be free from loose particles and grease before painting.
New surfaces: Must be washed with mordant solution and rinsed with water
and allowed to dry before applying the paint.
Previously Painted Surfaces: Roof surfaces that show signs of flaking must
be completely sanded before painting.
Packaging
5 and 20 Litres plastic containers and 200 Litres steel drums
SAFETY PRECAUTIONS
1. Keep out of reach of children.
2. Ensure to maintain good ventilation during application and drying process.
3. In case of skin contact, wash with soap and water or a recognised skin cleaner. Avoid contact
with eyes. In case of contact with eyes rinse immediately with running water and seek
medical advice.
4. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek
medical advice.
5. To avoid any risk of spillage, always transport in a secure upright position.